ISOMETER® isoCHA425

  • 根据 CCS 或 CHAdeMO 监控直流充电站的绝缘电阻
  • 在直流系统中,可以在1秒内检测到电压范围介于50V和500V之间的不对称绝缘故障
  • 可以在10s内检测对称绝缘故障
  • 在欠电压和过电压检测的情况下,测量系统电压(真实有效值)
  • 直流系统对地的电压测量(L+/PE和L-/PE)

The ISOMETER® monitors the insulation resistance RF for DC fast charging stations according to CHAdeMO standard or according to Combined Charging System (CCS) for nominal system voltage ranges between DC 0 V and 400 V.

Asymmetric insulation faults are reported with a response time ≤ 1 second. Symmetrical insulation faults within 10 seconds. The maximum permissible system leakage capacitance Ce is 5 μF.

In order to meet the requirements of applicable standards, customised parameter settings must be made on the equipment in order to adapt it to local equipment and operating conditions.

Please heed the limits of the range of application indicated in the technical data. Any use other than that described in this manual is regarded as improper.

问题? 联系我们!

isoCHA425
isoCHA425
  • 根据 CCS 或 CHAdeMO 监控直流充电站的绝缘电阻
  • 在直流系统中,可以在1秒内检测到电压范围介于50V和500V之间的不对称绝缘故障
  • 可以在10s内检测对称绝缘故障
  • 在欠电压和过电压检测的情况下,测量系统电压(真实有效值)
  • 直流系统对地的电压测量(L+/PE和L-/PE)

The ISOMETER® monitors the insulation resistance RF for DC fast charging stations according to CHAdeMO standard or according to Combined Charging System (CCS) for nominal system voltage ranges between DC 0 V and 400 V.

Asymmetric insulation faults are reported with a response time ≤ 1 second. Symmetrical insulation faults within 10 seconds. The maximum permissible system leakage capacitance Ce is 5 μF.

In order to meet the requirements of applicable standards, customised parameter settings must be made on the equipment in order to adapt it to local equipment and operating conditions.

Please heed the limits of the range of application indicated in the technical data. Any use other than that described in this manual is regarded as improper.

问题? 联系我们!

特点

  • 符合日本充电标准CHAdeMO的绝缘监视仪,监视直流充电站的绝缘电阻
  • 在直流系统中,可以在1秒内检测到电压范围介于50V和400V之间的不对称绝缘故障
  • 可以在10s内检测对称绝缘故障
  • 在欠电压和过电压检测的情况下,测量系统电压(真实有效值)
  • 直流系统对地的电压测量(L+/PE和L-/PE)
  • 自适应系统泄露电容,可高达2 μF
  • 可选启用延迟、响应延迟和延迟释放
  • 2组独立可调响应值,其范围为5…250 kΩ(报警1和报警2)
  • 通过LED灯(AL1、AL2),显示屏和报警继电器(K1、K2)发送报警信号
  • 带连接监视的设备自动自检
  • 可选常闭或常开操作
  • 通过多功能液晶屏显示测量值
  • 可激活故障记忆
  • RS-485(与电隔离)包含下列协议:
    – BMS接口(本德尔测量设备接口),用于与本德尔其他组件进行数据交换
    – Modbus RTU
    – IsoData (用于连续数据输出)
  • 密码保护,防止未经授权的参数更改

应用

  • 符合日本充电标准CHAdeMO的绝缘监视仪,用于电动汽车直流充电站

ISOMETER® isoCHA425 变体

型号额定电压Un订货号*
isoCHA425-D4-4CCS: DC 0…400 V
CHAdeMO: DC 50…400 V
B71036395
B91036395

*(B7… = 推线端子 / B9… = 螺丝端子)

可选的附件,用于 ISOMETER® isoCHA425

型号订货号
螺丝端子安装夹 (每台设备1片)B98060008
安装支架 XM420B990994 

下载 ISOMETER® isoCHA425

命名类型尺寸语言时间戳D-/B-数量
We are your eMobility partner! 彩页 262.3 KB 2023/11/2929.11.2023
isoCHA425 CE 合格声明 87.4 KB 2024/04/1818.04.2024
UKCA - isoCHA425 声明书 121.5 KB 2024/04/2323.04.2024
RoHS/REACH Report - B71036395 RoHS/REACH 报告 252.3 KB 2024/09/0606.09.2024
isoCHA425 手册 2.9 MB DE2023/08/1717.08.2023D00352
isoCHA425 手册 2.9 MB EN2023/08/1717.08.2023D00352
isoCHA425 快速启动 1,019.9 KB DE2024/01/3030.01.2024D00352
isoCHA425 快速启动 1,019.9 KB EN2024/01/3030.01.2024D00352
isoCHA425 技术规格书 548.4 KB DE2023/08/2222.08.2023D00352
isoCHA425 技术规格书 543.2 KB EN2023/08/2424.08.2023D00352
isoCHA425 技术规格书 547.0 KB FR2023/08/2222.08.2023D00352
isoCHA425 技术规格书 546.5 KB ES2023/08/2222.08.2023D00352